Fenix Imvico TK41, Руководство по эксплуатации

Страница: 63 / 88

FENIX IMVICO TK-41 OPERATION MANUAL
63/88
GS ! n
[Name] Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
[Range] <00>
≤
n
≤
<FF>H
(1
≤
vertical number of times
≤
8, 1
≤
horizontal number of times
≤
8)
[Description] Selects the character height using bits 0 to 3 and selects the character
width using bits 4 to 7, as follows:
Bit OFF / ON Hex Function
0
1
2
3 Character height selection. See Table 2.
4
5
6
7 Character width selection. See Table 1
Table 1 Table 2
Character Width Selection Character Height Selection
Hex Width Hex Height
00 1 (normal) 00 1 (normal)
10 2 (double-width) 01 2 (double-height)
20 3 02 3
30 4 03 4
40 5 04 5
50 6 05 6
60 7 06 7
70 8 07 8
[Notes]
•
This command is effective for all characters, except for HRI characters.
•
The vertical direction is the paper feed direction, and the horizontal direction
is perpendicular to the paper feed direction.
•
When characters are enlarged with different sizes on one line, all the
characters on the line are aligned at the baseline.
•
The ESC ! command can also turn double-width and double-height modes
on or off. However, the setting of the last received command is effective.
[Default] n = <00>H
[Reference] ESC !, APPENDIX A