14
9.2 Pairing new device - monitor
To select pairing, press and hold
.
1.
Use the arrows
to move to Pairing and by press the
key you will get to
the Device Manager where you work with the device.
2.
Switch the monitor to pairing mode:
• Switch off the monitor with a magnet, the LED flashes red.
• Then reattach the magnet to the target on monitor and hold until both LEDs
(green and red) flashes on the monitor.
• The monitor is now in pairing mode.
• Place the device close to the gateway.
3.
By arrows
move the cursor to an empty item
4.
Short press of
key you confirm the chosen item.
5.
The correct selection of the action is confirmed by the
Pairing new device
information
screen.
6.
If pairing is successful, a menu is displayed for editing the displayed device.
