12
9. DEVICE MANAGER - PAIRING DEVICE
Device Manager is used for pairing, editing and deleting devices (energizers and monitors) in
the gateway.
» Pairing Device -
Pairing is the process of linking communication between two devices. The gateway
GW100 can pair up to twelve different devices. The device can be renamed individually.
If all positions are occupied, it is not possible to start a new pairing!
9.1 Pairing new device - energizer
To select pairing, press and hold
.
1.
Use the arrows
to move to Pairing and by press the
key you will get to
the Device Manager where you work with the device.
2.
Switch the energizer to pairing mode - Switch on energizer and then switch it off with
one short press. Then press and hold the button (> 5 seconds), until the LED flashes
very quickly. Now is energizer in pairing mode. Place the device close to Gateway.
3.
By arrows
move the cursor to an empty item
4.
Short press of
key we confirm the chosen item.
5.
The correct selection of the action is confirmed by the
Pairing new device
information
screen.
