Femi DP 12-941, Руководство пользователя

Страница: 24 / 164

24 ▪ English
DP 12-941 / DP 12-943
9.2.3. Drilling surface position
adjustment
1. Loosen lever (B) and turn handle (A) to
vertically move the drilling surface along the
column.
2. Then fully tighten lever (B) .
B
A
9.2.4. Chuck removal
Shaft
Splitting wedge
Shaft
18
Chuck
Arbor
(teeth)
Grooves
9.2.5. Drilling surface alignment
adjustment
9.3. Stopping the cycle
1. Press the OFF button to stop the cycle.
9.4. Switching off
1. Stop the work cycle.
2. Disconnect the plug from the wall socket.
10. Maintenance
Refer to “General safety regulations” .
PPE REQUIRED
Operations carried out by the operator:
CHECK FREQUENCY
Check the off button. every 8 h
Check the control devices. every 8 h
Visually check integrity of the guards. every 8 h
Operations carried out by the maintenance
technician:
CHECK FREQUENCY
Internal check of the motor’s compartment. every 160 h
Check electrical equipment.
every 480 h
Check the motor’s electrical insulation. every 960 h
Cleaning operations:
CLEANING FREQUENCY
Clean the devices of the various units
with a vacuum cleaner or brush to
remove product residues.
every 8 h
Clean the transparent methacrylate guard
with a cloth and antistatic detergent.
every 8 h
WARNING! Do not use abrasive or
acid products, scourers, spatulas
or metal brushes.
Lubrication operations:
LUBRICATION FREQUENCY
Lubricate column, arbor, chuck. if necessary
Clean the transparent methacrylate
guard with a cloth and antistatic
detergent.
every 8 h
11. Scrapping and disposal
Refer to “General safety regulations” .