![background image](http://html1.mh-extra.com/html/femi/842/842_instructions-for-use-and-maintenance-manual_4015912019.webp)
16
(1
7528%/(6+227,1*
352%/(06
&$86(6
62/87,21668**(67('
7KHPRWRUGRHVQRWUXQ
1. Faulty motor, power supply cable
or plug.
2. Burned out fuses
1. Have the machine checked by
skilled personnel.
Do not try to repair the machine
yourselves as it may be
dangerous.
2. Check the fuses and replace
them if necessary.
7KHPRWRUVWDUWVVORZO\DQGGRHV
QRWUHDFKUXQQLQJVSHHG
1. Low power supply voltage.
2. Damaged windings.
3. Burned out capacitor
1. Ask for the Electricity Board to
check the voltage available.
2. Have the machine motor
checked by skilled personnel.
3. Have the capacitor replaced by
skilled personnel.
([FHVVLYHPRWRUQRLVH
1. Damaged windings.
Faulty
motor
1. Have the motor checked by
skilled personnel
7KHPRWRUGRHVQRWUHDFKIXOO
SRZHU
1. Overloaded circuit due to
lighting, utilities or other motors
1. Do not use other utilities or
motors on the circuit to which the
cutting-off machine is connected
7KHPRWRUWHQGVWRRYHUKHDW
1. Overloaded motor.
2. Insufficient motor cooling
1. Avoid overloading the motor
during cutting.
2. Remove dust from the motor in
order to allow adequate cooling.
'HFUHDVHLQFXWWLQJFDSDFLW\
1. The blade has been repeatedly
sharpened and its diameter has
decreased
1. Adjust the limit switch for the
lowering of the head.
7KHFXWWLQJILQLVKLVLUUHJXODURU
XQHYHQ
1. The blade is worn out or the
teeth are not suited to the
thickness of the material being
cut
1. Have the blade sharpened by
skilled personnel.
2. Check that the blade being used
is appropriate by referring to the
paragraph ‘SELECTION OF THE
BLADE’.
)ODNLQJRIWKHZRUNSLHFH
1. The blade’s teeth are not suited
to the work piece
1. Check the appropriate teeth to
use by referring to the paragraph
‘SELECTION OF THE BLADE’