9
(1
,1'(;
1
INTRODUCTION TO USE .............................9
2 INSTALLATION ............................................11
3
ADJUSTING (Fig. 4-5-6-7-8) ........................12
4
USE – SAFETY WARNINGS .......................12
5 ACCESSORIES............................................14
6 MAINTENANCE ...........................................14
7 TROUBLESHOOTING ...................................9
,1752'8&7,217286(
Before using your mitre-saw, please read this
instruction manual very carefully in order to become
familiar with the machine and its recommended use.
Do not lose this manual as it is an essential part of the
machine itself. We recommend you always refer to it in
order to operate the machine in the best and safest way
possible.
Keep the manual with the machine and handy at all
times so it can be consulted whenever necessary.
Use the machine exclusively for the uses specified
below, follow manual instructions carefully and never try
to force or to tamper with it, or to use it inappropriately.
6$)(7<,1)250$7,21$1'127(6
Do not underestimate the symbols "HAZARD" and
"CAUTION" in this manual.
Symbols and notes precede all hazardous operations
both to give safety indications, to draw the users'
attention to danger and also to outline the appropriate
behaviour to adopt to avoid such events.
The three symbols used and relative wording are the
following:
:$51,1*
a hazardous situation/action which
could be severely harmful.
&$87,21
a situation/action which could be
moderately harmful or damage objects.
127(
the notes preceded by this symbol are of
a technical nature and simplify use.
29(5$//',0(16,216
9(56,21
Length 580 mm-Width 500 mm-Height 370 mm
Upper work surface
430 x 305 mm *
*Dimensions of work surface
410 x 305 mm
Upper work surface max protrusion of blade
40 mm
Weight
19kg
9(56,21
Length 580 mm-Width 500 mm-Height 430 mm
Upper work surface
476 x 325 mm*
*Dimensions of work surface
476 x 305 mm
Upper work surface max protrusion of blade........50 mm.
Weight
21kg
6$)(7<$1'58/(6
The machine was designed and built according to the
Community Directives in force:
&(&(
&(
The enclosed CE Declaration of conformity, together
with the CE mark on the product itself are an integral
part of the machine: both guarantee product conformity
with the aforesaid safety Directives.
(19,6$*('86($1'81)25(6((186(
The most advanced technologies have been used to
design and manufacture the mitre-saw. It is suitable to
cut wood, aluminium and plastics and can be used by
professionals, craftsmen and expert hobbyists alike.
(19,6$*('86(
To cut:
- HARD AND SOFT, DOMESTIC AND EXOTIC WOOD
BOTH LONGITUDINALLY AND TRANSVERSALLY
and with appropriate adjustments (specific blade and
clamps):
- PLASTICS
- ALUMINIUM AND ALUMINIUM ALLOYS
81)25(6((186(
Do not cut:
- FERROUS MATERIALS, STEEL AND CAST IRON OR
ANY OTHER MATERIAL NOT MENTIONED ABOVE
- USE OF THE CIRCULAR SAW WITHOUT THE BLADE
GUARD IS STRICTLY PROHIBITED
67$1'$5'6$)(7<352&('85(
- Remove all cuttings from the work surface ensuring it is
completely clean.
- Use the machine in dry areas and away from
inflammable substances or gas.
- Do not use the machine outdoors in adverse weather or
environmental conditions (explosive atmospheres,
storms or rain).
- Wear appropriate clothing: do not wear loose-sleeved
garments or objects such as scarves, chains or bracelets
which may get caught in the machine's moving parts.
