10
(1
- Always use personal protective equipment: standard
accident-prevention goggles, well-fitting gloves,
earphones or earplugs and headgear to cover hair if
necessary.
- Handle the power supply cable with care: do not use it
to lift the machine or to pull the plug out of the socket.
Keep it away from cutting edges, oily patches and
high temperatures.
- Keep the machine out of the reach of children: do not
allow them to approach or touch the machine.
- When in need, only use approved power supply
extension flexes.
- Beware of electrocution: avoid all contact with earthed
objects such as pipes, radiators and refrigerators.
6$)(7< 35(&$87,216 72 %( $'237('
'85,1*86(
- Do not force the machine unnecessarily: excessive
cutting pressure may lead to rapid deterioration of the
blade and a decrease in performance in terms of
finish and cutting precision.
- When cutting aluminium or plastics, it is advisable to
use the clamps designed for this purpose: the pieces
to be cut must always be held firmly in the vice.
- Avoid accidental start-up: do not press the start button
while inserting the plug into the socket.
- Always use the tools recommended in this manual to
obtain the best results from your cutting machine.
- Always keep hands away from the work area when
the machine is running; before performing tasks of
any kind release the main switch located on the
handgrip, thus disconnecting the machine.
+$=$5'6$1'5(6,'8$/5,6.6
5HVLGXDOULVNFDXVHGE\H[SRVXUHWRQRLVH
6RXUFHRIUHVLGXDOULVN
The mitre-saw is associated with residual risks
concerning acoustic emissions generated by the saw
itself during operation, in particular (for example) when
cutting a 90x30-mm plank of wood (deal) across the
grain, or when cutting a 40x40-mm aluminium section
bar which is 2 mm thick (see the aforementioned
values).
3UHFDXWLRQVDGRSWHG
Warning stickers are affixed to the machine itself
indicating the risk and the need for all
operators/maintenance technicians to wear appropriate
hearing protection.
6DIHW\VWDQGDUGV
:$51,1* 7KH RSHUDWRU DQGRU DXWKRUL]HG
PDLQWHQDQFH WHFKQLFLDQV PXVW DOZD\V ZHDU
DSSURSULDWH KHDULQJ SURWHFWLRQ EHIRUH
ZRUNLQJZLWKRURQWKHPDFKLQH
,1)250$7,21 &21&(51,1* 12,6( $1'
9,%5$7,21/(9(/6
1RLVH
Noise level at the operator’s work position (without load)
.................................................................... Leq 74 db(A)
Noise level at the operator’s work position (with
load)………………..Leq 81.2 db(A)
7HVWFRQGLWLRQVZKHQZRUNLQJZLWKORDG
&XWWLQJ D GHDO SODQN [ PP DW WKH VSHHG RI
UHYPLQ
Sound power (without load) .....................Lwa 85.7 db(A)
Sound power (with load) ..........................Lwa 94.6 db(A)
&XWWLQJDQDOXPLQLXPVHFWLRQEDU[PPPP
WKLFNDWWKHVSHHGRIUHYPLQ
Sound power (without load) .....................Lwa 83.6 db(A)
Sound power (with load) ........................Lwa 101.4 db(A)
The measurements were carried out in accordance with
standard UNI EN ISO 3746
9LEUDWLRQ
Mean frequency-weighted hand - arm acceleration
vibration exposure does not exceed 2.5 m/s².
The measurements were carried out in accordance with
standards
UNI EN ISO 5349-1 and 5349-2
127(:KHQ FXWWLQJ DOXPLQLXP WKH XVH RI
SURWHFWLYH HDUSKRQHV RU HDU SOXJV LV
DEVROXWHO\QHFHVVDU\
7KHXVHRIWKLVJHDULVDOVRUHFRPPHQGHGIRU
DOORWKHUXVHV
,1)250$7,21
$%287
(/(&7520$*1(7,&&203$7,%,/,7<
The European regulations on safety and, in particular,
the 2004/108/EEC contemplate that all the equipment
be equipped with shielding devices against radio
interferences both from and towards the outside.
This machine is safe and in compliance with the above
regulations.
Tests were carried out according to Safety Standard EN
55014-1, EN 55014-2.
0$&+,1('(6&5,37,21)LJ
The mitre-saw machine consists of three basic parts :
the machine body complete with motor
which is
integrated into lower part
by means of the joint
and
the swivel support 5, and the upper work unit consisting
of the work table
, the rest square
and the movable
blade cover
.
The base
is used as rest when cutting and butting
operations have to be carried out in the different
available angles; the upper table is used as rest when
trimming or sectioning wood tables of huge dimensions
and, in particular, when cutting wood along grain.
