Assembly instruction manual FELIX 2.0 3d printer
www.FELIXprinters.com
Page
13
of
51
On the bottom insert the bronze nut into the plastic part.
Take the
z_axis_carrier_pt1_v15_F2_0 part and slide it as indicated on
the picture above onto the already mounted plastic part.
As indicated screw on both sides m4x20 bolts into the part to clamp
the 2 big plastic parts together.
Mount the big part onto the cart of the linear bearing with M5x16
bolts, don’t forget the M5 washers!
Put a piece of the supplied double side tape underneath 2 opto-
sensors
