Assembly instruction manual FELIX 2.0 3d printer
www.FELIXprinters.com
Page
10
of
51
7
MODULE 2: Z-AXIS (TIME: 45-90 MIN.)
Note:
Most holes are designed to minimize the need for any post processing, like filing and drilling. Sometimes, however the bolts will not fit
smoothly and it therefore needs to be drilled out slightly. Required drill sizes can be 3, 4 and 5mm.
BOM Z-axis
Part description
Amount
Hiwin lineair ball bearing set -
HGW15CC1R300Z0
1
Trapezium s bronze nut
1
motor nema 17
2
z-spindelmount bottom - v2
1
pulley_motor_HTD
1
z-axis-motor-bracket_v10_F2
1
z_axis_carrier_pt1_v15_F2_0
1
z_axis_carrier_pt2_v11_F2_0
1
optosensor
2
small bearing
4
z-axis-limitswitch_vane_v6_F2_0
1
Get the parts indicated in the list above.
IMPORTANT: DO NOT let the cart
of the linear bearing go off the rail.
There are small balls in there which
might fall out when the cart rolls of
the rail.
Place the frame on a table let the back face of the wide beam rest on
the table surface.
