Felder G 200, Руководство по эксплуатации

Страница: 41 / 48

41
!
"
$
#
%
&
/
(
)
Edgebander with glue pot
G 200 / G 220
Exchanging turn cutter plates flush trimming:
• Upper flush trimmer:
Loosen the screws, which hold the extraction hood. Pull
out extraction hood. The upper shaper is laid open
and you can change the whole shaper and also turn
cutter plates comfortably.
• Below flush shaper:
The height of the below flush shaper must be misplaced
as far as possible. Then you can easily exchange the
turn cutter plates. If you want to exchange the whole
shaper it is necessary to remove the under extraction
hood.(you can reach it by opening security door) Mis-
place the below sliding shoe by loosen the the screws.
Only take away the rear nuts.
• Exchanging Cutterplates:
Loosening the screws allows the cutter plates to be tur-
ned around or exchange.
• Exchanging Shaper:
Demount the shaper by rotating the blockage screw
clockwise.
!
Nut
"
extraction hood
#
Plate door
$
Sliding shoe
%
Screws
&
Rear nuts
/
Screw
(
Cutter plates
)
Blockage screw
Maintenance
Fig. 31: Exchanging tools
Fig. 32: Exchanging tools
Fig. 33: Exchanging tools