Felder G 200, Руководство по эксплуатации

Страница: 44 / 48

44
!
!
Edgebander with glue pot
G 200 / G 220
1. Heat the glue to the operating temperature.
Insert two wooden batons into the liquid glue.
2. Then, leave the glue to cool down completely and
warm up again.
As soon as the glue detaches itself from the walls of
the glue pot, remove the glue from the glue pot with
the wooden batons.
3. Remove burnt glue residues with a wooden spatula.
Clean the cooled down glue pot with rags and a
glue remover.
!
Wooden batons
10.3.7 Replacing the burnt glue
Warning! Risk of burns and serious injuries!
During filling and re-filling, periodic maintenance and whilst cleaning the glue pot, be aware that the glue
has an operational temperature of 200°C.
Use all suitable methods of protection to prevent severe injury.
The used glue must be disposed of according to the regulations of the country where the
machine is installed.
Attention! Risk of material damage!
Do not use pointed or abrasive objects or auxiliaries to clean the glue pot.
Fig. 40: Replacing the burnt glue
Maintenance