Fein JMU 137 PQW, Инструкция по эксплуатации

Страница: 26 / 92

26
en
Starting and stopping the drill motor
(figure 17).
To start the drill motor with clockwise rota-
tion, press the button with the „
“ sym-
bol. The drill motor starts with the highest
speed.
The last set speed is automatically stored
(
Memory Function ). To start the power tool
with the last set speed, press and hold the
button with the
symbol, and then press
the button with the symbol.
To lower the speed, press the „ “ sym-
bol.
To increase the speed, press the „
“ sym-
bol.
To stop the drill motor, press the „
“
symbol.
Do not stop the drill motor during the drill-
ing procedure.
To start the drill motor with counterclock-
wise rotation, press the button with the
„
“ symbol. The drill motor will run as
long as the button is pressed.
When the power supply is disconnected
while the motor is running, a protective cir-
cuit prevents automatic restarting of the
motor. Restart the motor again.
In case of overload, the drill motor automat-
ically stops and must be restarted again.
100
l
% 85
l
% 75
l
% 60
l
% 50
l
%
25
l
%
100
l
%
85
l
%
75
l
%
60
l
%
50
l
%
25
l
%
Memory Function
Fig. 17