Rotary Drills
Notes and requirements
C-SC_CSSM
Version 1.0
01.01.2019
Page
6
of
47
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
3
Notes and requirements
Please note
These instructions are only intended for persons with suitable technical training. It is assumed that
the reader has mechanical and electrical training.
Only use original FEIN spare parts!
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained
electrician, as improper repair can result in serious risks to the user.
Outside Germany, the regulations applicable in the relevant country must be observed.
The provisions set out in
DIN VDE 0701-0702
must be observed after repairs.
The relevant accident prevention regulations are to be observed during commissioning.
The German Equipment and Product Safety Act [ProdSG] applies for correct use.
Disclaimer
The content of this documentation has been carefully reviewed and produced to the best of our
knowledge. C. & E. Fein GmbH assumes no responsibility for the completeness, relevance, quality
or correctness of the information provided.
Liability claims against C. & E. Fein GmbH that relate to material or immaterial damage caused by
the use or failure to use the information provided or by the use of incorrect or incomplete
information are excluded. Claims relating to acts committed intentionally or through gross
negligence are categorically excluded.
I
NFORMATION
Read the operating instructions for the product before
carrying out the repair work.
