Rotary Drills
Fitting
C-SC_CSSM
Version 1.0
01.01.2019
Page
44
of
47
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.3 Fitting the carbon brushes
Steps that must be completed:
-
Fitting the clutch and shafts
-
Fitting the switch pushbutton
-
Fitting the gearbox parts
-
Fitting the armature
-
Fitting the intermediate gearbox
-
Positioning the intermediate gearbox
-
Fitting the stator
-
Fitting the gearbox housing
Tools:
-
Slotted screwdriver
-
PH2 cross-tip screwdriver
-
Assembly aid
1.
Position the carbon brush (
1
).
2.
Position the spring (
2
).
3.
Position the cable (
3
).
4.
Screw in the screw (
4
).
5.
Repeat steps 1 to 4 on the opposite side of the machine.
4
2
3
1
