Rotary Drills
Fitting
C-SC_CSSM
Version 1.0
01.01.2019
Page
43
of
47
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.2.9 Positioning the gearbox housing
Steps that must be completed:
-
Fitting the clutch and shafts
-
Fitting the switch pushbutton
-
Fitting the gearbox parts
-
Fitting the armature
-
Fitting the intermediate gearbox
-
Positioning the intermediate gearbox
-
Fitting the stator
Tools:
-
PH2 cross-tip screwdriver
1.
Position the gearbox housing (
1
).
2.
Screw in the two screws (
2
).
3.
Repeat step 2 on the opposite side of the machine.
1
2