Fein ABAS18-63AS, Руководство пользователя, Страница: 15 / 228

AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Protect the battery against heat,
e.g. against continuous intense sun-
light, fire, dirt, water and moisture.
There is a risk of explosion and short-
circuiting.
Product Description and
Specifications
English
Read all the safety and general in-
structions.
Failure to observe the
safety and general instructions may
result in electric shock, fire and/or
serious injury.
Please observe the illustrations at the beginning
of this operating manual.
Do not use this power tool until you have
thoroughly read and fully understood this
operating manual. Pay additional attention to
the applicable national health and safety reg-
ulations.
Intended Use
English
The power tool is intended for making separating
cuts in plastic, metal and rubber while resting
firmly against the material being sawn. It is suit-
able for straight cuts with a mitre/bevel angle of
up to 45°. The saw blade recommendations are
to be observed.
Product Features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Lock-off function for On/Off switch
(2) On/off switch
(3) Handle (insulated gripping surface)
(4) Locking clip for cover
(5) Roller guide
(6) Bandsaw blade
(7) Saw blade guide
(8) Direction of rotation arrow on housing
(9) Lever for bandsaw blade pre-tension
(10) Worklight
(11) Rechargeable battery
a)
(12) Auxiliary handle (insulated gripping sur-
face)
(13) Cover for bandsaw blade
(14) Rechargeable battery release button
(15) Roller for bandsaw blade
a) Accessories shown or described are not included
with the product as standard. You can find the
complete selection of accessories in our accessor-
ies range.
Technical Data
English
Bandsaw ABAS18-63AS
Article number 7 135 …
Rated voltage V= 18
No-load speed
A)
m/
min
162
Saw blade dimensions mm 733 × 12.7 ×
0.35
Max. cutting depth mm 63.5
Weight according to
EPTA-Proced-
ure 01:2014 kg 3.7−4.7
B)
Recommended ambi-
ent temperature during
charging °C 0 to +35
Permitted ambient
temperature during
operation
C)
and during
storage
°C –20 to +50
Recommended re-
chargeable batteries GBA 18V…
ProCORE18V…
Recommended char-
gers GAL 18…
A) Measured at 20–25 °C with rechargeable battery
ProCORE18V 8.0Ah .
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
English
Noise emission values determined according
to
EN 60745‑2‑20 .
Typically, the A-weighted sound pressure level
of the power tool is
79 dB(A). Uncertainty
K = 3 dB. The noise level when working can ex-
ceed the volume stated.
Wear hearing protec-
tion!
Vibration total values a
h
(triax vector sum) and
uncertainty K determined according
to
EN 60745‑2‑20 :
Sawing metal: a
h
= 5.3 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value
given in these instructions have been measured
in accordance with a standardised measuring
procedure and may be used to compare power
tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used
for other applications, with different application
tools or is poorly maintained, the vibration level
en
15
1 609 92A 7RX • 15.11.22 • T