IDENTIFICATION
ID ISC.LRU3000 / LRU3500
4 Terminals
Page 20 of 30
4.5.2 Relay outputs on connector X5
There are 3 relay outputs available on connector X5.
Fig. 17
:
Relay output pin-outs REL1-3
CAUTION:
The relay output is configured for max. 24 V DC / 2 A constant load.
The switching current must not exceed 1A.
The relay output is intended for switching resistive loads only. If an inductive load is connected,
the relay contacts must be protected by means of an external protection circuit.
Fig. 18
:
Internal and external wiring of the relay output