D CH
Users Manual
U
CONTENT
I Preface 1
1.1 Notices when open the cases 2
1.2 Install environment 2
1.3 Warning of installment 3
1.4 Attention of connection design 3
II Function And Specification 4
2.1 Function list 4
2.2 Specification Table 4
III Installation and connection 5
3.1
Installation dimensions 5
3.2
Parts connection diagram 6
3.3 Terminal board description 7
3.4 Interface circuit 8
3.5 Sensor dimension 8
IV System Interface 9
4.1 ATP Function Guide 9
4.2 ATP Action Timing Diagram 10
4.3 Wiring example 10
V Parameter Setting 12
5.1 Key specification 12
5.2 Digital display 12
5.3 Enter setting 12
5.4 Cam parameter setting 13
5.5 System parameter setting 15
5.5.1 System menu entrance 15
5.5.2 System parameter setting table is as following 16
5.5.3 Description of system menus 16
5.5.4 Rotary direction setting
16
5.5.5 Controller 180°calibrate 16
5.5.6 Counts setting 17
5.5.7 Other parameter of controller 17
5.5.8 The production count arriving function 17
VI Protection and alarm 18
6.1 Protection And Alarm Instruction 18
6.2 Protection and trouble codes 18
1
I Preface
Thank you for your using of CAM888 cam controller, here after is called controller, which is
produced by DUCH automatic technology CO., Ltd. The controller adopts the newest
technology. And our company has the completely independent intellectual property. Besides, it is
the national invention patent product. The characteristics are as following:
z
Leading technology
☆
It uses the high speed microprocessor, the large-scale field programmable chip and the
entire digital high accuracy high speed control.
☆
Gear change system: Intelligent calculate of stopping at top dead end.
☆
It is dynamic indicating for cam angle setting, which is more human nature.
z
High performance
☆
The displayed precision of angle measurement may amount to ±0.1°.
☆
braking test has 2 channels outputs
.
programmable scissors cam has 6
channels outputs.
Production value
has 1channel output.system normal
indication has 1 channel output. Totally 16 channels output.
Before using the controller please read the manual carefully Make sure it is used correctly
and then it will display its high performance. Moreover, this manual is an appendix which is sent
with the controller. Please take care of it after you have used it. So that it will work when you
repair and maintain the controller.
1.1 Notices when open the cases
When open the case, please confirm the following items carefully.
◇
If there is any damage during the delivery.
◇
Check if the rating value on name plate is the same with your requirement. Make sure the
accessories are whole.
◇
Any question please contact us or the supplier.
1.2 Install environment
◇
The height is no more than1000m
；
When it is over1000m, it will reduce the capability of
the controller because of the thin air.
◇
Environment temperature
：
-10
℃～
+40
℃
Environment humidity
：
No more than 50% at
40
℃
. No more than 90% below 20
℃
.
◇
When the installation base allowable vibration is 10
～
150HZ, its maximum vibration
acceleration should be no more than 5m/s².
◇
Power supply
：
DC24V1A.
2
