![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_installation-instructions-manual_3888020019.webp)
IDENTIFICATION
ID ISC.LRU3000 / LRU3500
4 Terminals
Page 19 of 30
4.5 Outputs on connector X5
4.5.1 Digital outputs on connector X5
Optocoupler output (X5/1-2):
The transistor connections, collector and emitter, of the optocoupler output are galvanically isolated from the
Reader electronics and are carried to the outside without any internal ancillary circuitry on Terminal X5. The
output must therefore be powered by an external power supply.
Fig. 15
:
Optocoupler -Outputs OUT1-2
Fig. 16
:
Internal and external wiring of the optocoupler-outputs OUT1-2
CAUTION:
The output is configured for max. 24 V DC / 30 mA.
Polarity reversal or overload on the output will destroy it.
The output is intended for switching resistive loads only.