OBID
i-scan
®
Application-Note
ID ISC.ANT800/600-DA
FEIG ELECTRONIC GmbH
Seite 21 von 26
N50101-0e-ID-B.doc
Step
Procedure
Note
8
Repeat Step 2 to 7 for
Output Channel Input1: 2
Output Channel Input2: 7
9
For a Gate with 6 antennas repeat step 2 to 7 for
Output Channel Input1: 3
Output Channel Input2: 6
If the nominal values are not achieved, check the following:
•
All cables firmly fastened and have good contact ?
•
Were the ring cores installed in the antenna cables ?
•
Were the cables routed according to specification ?
•
Are other RF-ID systems installed in the vicinity ?
•
Are there larger metal objects near the antenna (separation < 1.0 m)
•
Are there devices nearby which could affect operation of the gate (larger machines or RF
devices) ?
To determine which devices may be affecting operation of the gate, momentarily interrupt supply to
them one at a time.
