OBID
i-scan
®
Application-Note
ID ISC.ANT800/600-DA
FEIG ELECTRONIC GmbH
Seite 17 von 26
N50101-0e-ID-B.doc
Table 10: Setting the operating parameters
Step
Vorgang
Hinweis
1
Menü „Configuration“
auswählen
2
Reader Parameters
CFG3: RF-Interface:
Send power (here 8W)
Turn on needed
transponders and
unneeded ones off. (here
ISO 15693)
FSK Transponder set to
„0x02 both antennas“
3
„Write“ to set parameters
4
System Parameters
CFG10: General
For tuning, the „ISO-Host
Mode“ must be activated
5
„Write“ to set parameters
