45
Hotkey Activation
Description, Specifications, SS Software, and Operation Manual
Federal Signal
www.fedsig.com
Hotkey Activation
The following section describes how to activate from the front panel hotkeys on the
unit.
Unlocking the System
The keypad is secured with a key lock switch. When the key is in the LOCK
position, the LCD displays Keypad Locked message, time, and date.
** Keypad Locked **
07:29 06/19/2019 (c)
When the key is turned to the UNLOCK position, the keypad is enabled and the standby
screen displays on the LCD. The unit is ready to accept commands.
Press Function Key
F1..F2 to Activate
07:29 06/19/2019 (c)
When the unit is powered up,
When the is on, the printer prints On Line.
Automatic Logging
The displays all incoming and outgoing message on the LCD display. If enabled
in the configuration, the logs any incoming statuses and alarms DTMF or Digital
to the printer. If Com Port 2 is configured for Printer Messages, the status and alarms are
sent there as well. Also, the logs each time it powered up, all manual encode
activations, outgoing poll requests, and the results of each step in the self test procedure.
The decodes and displays on the LCD any incoming DTMF of Digital status or
alarm messages. A typical message includes the site number, siren type, and alarm or
status depending on the message type.
Press Function Key
F1..F2 to Activate
Site# 001 FCD Alarm
07:29 06/19/2019 (s)