31
Using the S Software
Description, Specifications, SS Software, and Operation Manual
Federal Signal
www.fedsig.com
Using the S Software
The following sections describe the options on the S tabs:
• General Configuration
• Activation Functions
Using the General Configuration Tab
Digital Communications
The following shows the Digital Communications group box of the General Configuration
tab.
Field
Description
128 Bit Encryption button
Click to enter your Encryption key to secure your
. The default Encryption key is all zeros.
256 Bit Encryption button
Click to enter your Encryption key to secure your
. The default Encryption key is all zeros.
Security Code
By default, the security code is 65535, which means
that the security code is open.
Unit ID#
Enter the unit ID number. Possible selections range
from 900 to 999.
Repeat All-Calls
Sets the to send all All-Calls commands
three times.
Spin box—Site #
Selects the RTU (siren site number).
Site Active
Check if the unit is active.
Repeaters Scheme #1
Enter repeater numbers if used for this site.
The attempts to reach this site through
Repeater Scheme #1, if entered. If that fails, the
attempts through Repeater Scheme #2.
NOTE
: Enter for each site Site Active and repeater
schemes, if used.
Repeater Scheme #2
Enter repeater numbers if used for this site.