39
Programming
Signaling Standalone Manual
Federal Signal
www.fedsig.com
9. Restoring Configuration to Factory Defaults
You can restore the factory default settings with or without restoring the network
parameters.
Default Settings
RTU Number: 1
Description: my description
SmartMsg disabled
Modbus disabled
Smartmsg Server: 10.10.10.10
IP Address: 10.10.10.1
Subnet Mask: 255.255.0.0
Default Gateway: 10.10.10.10
Primary/Secondary DNS: 0.0.0.0/0.0.0.0
Admin user name: admin
Admin user password: fedsig
User 1 - User 4 username/password: blank
Factory Support User: Enabled
To restore configuration to factory defaults:
1.
Click Factory Defaults.
The Factory Defaults page displays.
Fields
Description
Include
Network
Parameters
Check to include network parameters.
IMPORTANT:
This changes the IP address of the RTU to factory
default settings and makes the device inaccessible over a production
network.
Apply
Restores your settings to the factory defaults.
IMPORTANT:
Your current settings will be overwritten.
