35
Programming
Signaling Standalone Manual
Federal Signal
www.fedsig.com
Fields
Description
Username
Enter the name of the user (case sensitive).
Password
Enter the user's password (case sensitive).
Password
Confirm
Enter the user's password again. The Password Confirm must match
the Password.
Privileges
In the Privilege list, select one of the following:
•
Full Admin: Has unrestricted access to all configuration screens
•
View and Configuration: Can configure all settings except User
Setup
•
View Only: Can only view the Home screen
Enable
Factory
Support User
Check to enable the factory support user. When enabled, a hidden
static user and password is enabled for Federal Signal technical
support. You can disable this user.
Apply
Saves your settings. You must reboot for changes to take effect.
2.
For the Admin fields, enter the default Username:
admin (This is the default username.)
3.
For the Admin fields, enter the Password:
fedsig (This is the default password.)
NOTE
: The password is case sensitive.
4.
Enter the fields for Users 1 through 4 to create optional users. Each username
requires a password and a security privilege.
5.
Click Enable Factory Support User to enable a hidden static user and password for
Federal Signal Technical Support.
6.
Click Apply to save changes.
7.
Reboot the device to load the changes into the RTU.
