8
General Description
Informer15 Speaker (Model IS-I-P15X Series C)
Federal Signal
www.fedsig.com
Features
The Informer15 has the following features; some features require using the Commander
®
software system:
• Outdoor or indoor IP-enabled speaker for audible and visual alerts
• Out-of-the-box standard programming. Changes to the configuration can be made
using our web interface found on www.fedsig.com.
• Out-of-the-box configuration (All modes are maintained and normally open)
• Tone 1 – NFPA Temporal Coded Slow Whoop, LED on
• Tone 2 – Alternating High-Low, LED on
• Tone 3 – Rapid Siren (Yelp), LED on
• Tone 4 – Steady Horn (Euro-Toxic), LED on
• Speaker rated at 112 dB for tones and 107 dB for pink noise at 10 feet
• Seven standard built-in warning signals: Wail, Steady, Alternate Wail, Alternate Steady,
Pulsed Wail, Pulsed Steady, Auxiliary Chime
• Broadcasts prerecorded voice or tone files
• Deliver intelligible voice messages from locally prerecorded files
• Removable microSD card for custom message generation. Store up to 4000 voice or
tone messages that total up to 17 hours of recording time.
• Ambient-noise-level monitoring with automatic volume control
• Individually configured for volume and noise-level adjustments
• Wall mount
• Four local alarm initiation inputs to activate unit locally or standalone operation
Momentary mode: contact closure sounds the alarm for the programmed duration.
Continuous mode: sounds the alarm for duration of the closure.
• One open collector output paired with 24 Vdc for controlling an external relay
• High-intensity LED light that can be activated independently or with messages
• Models available with white, red, amber, blue, and green LED lights
• Wide variety of flash patterns
• Power over Ethernet using 802.3at PoE+ 25.5 W or 24 Vdc powered (two models)
• Wide operating temperature range
• Allows remote software upgrades
• NEMA 4X Enclosure
• UL and cUL listed
• Complies with FCC Title 47, Part 15
