manualshive.com logo in svg

Federal Signal Corporation IS-I-IP15X, Руководство пользователя

Поделиться
Скачать
Federal Signal Corporation IS-I-IP15X Скачать руководство пользователя страница 33

33

Programming

Signaling Standalone Manual 

Federal Signal

 www.fedsig.com

4. Configuring Security

Configure up to four IP address filters to limit access to incoming SIP calls. If one or more 

filters are enabled, the source IP address of the caller must be within one of the enabled 

filter ranges, or the call is rejected. When using a SIP server, the source IP address is the 

SIP server or proxy server. 

NOTE

: The IP Address Filter does not apply to Multicast paging.

To configure security:

1. 

Click Security. 

The Security page displays.

Field

Description

SIP IP Filter

Start IP Address

Starting IP Address in dotted-decimal format.

End IP Address

Ending IP Address in dotted-decimal format. The ending IP 
address must be a greater value than the starting IP address.

Enabled

Check the box to enable this filter. If all filters are disabled, 

the system will accept any IP address. If one or more filters 

are enabled, the source IP address must be within one of the 

enabled filter ranges.

Apply

Saves your settings. You must reboot for changes to take 

effect.

2. 

Enter the starting IP Address in dotted-decimal format.

3. 

Enter the ending IP Address in dotted-decimal format.

4. 

Click Enabled.

5. 

Click Apply.

6. 

Reboot the device for the IP address change to take effect.

Содержание IS-I-IP15X





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды