Federal Signal Corporation IMPAXX Series, Руководство по установке и обслуживанию

Страница: 15 / 20

Wiring the IMPAXX in the Vehicle
15
Installation and Maintenance Manual
Federal Signal
www.fedsig.com
Figure 2 Wiring from one controller to one follower
290A5943C
ALTERNATING
12 Vdc (+BAT)
RED RED
CONTROLLER
LIGHT HEAD
ORG ORG
BLACK BLACK
FOLLOWER
LIGHT HEAD
GROUND (–GND)
FUSE
*
SYCHRONIZED
12 Vdc (+BAT)
CONTROLLER
LIGHT HEAD
RED RED
YELLOW YELLOW
BLACK BLACK
FOLLOWER
LIGHT HEAD
GROUND (–GND)
FUSE
*
* FOR 1 TO 4 LIGHT HEADS: 3 A FUSE
FOR 5 TO 8 LIGHT HEADS: 5 A FUSE
FOR MORE THAN 8 LIGHT HEADS: 10 A FUSE
Selecting a Flash Pattern
When the light heads are connected in a configuration, the
controller LED light head can be used to control the flash pattern of
the entire system.
To select a flash pattern:
1. Tap and remove the green pattern selection wire from the
controller light head to negative ground power (-GND) as many
times as needed to display the pattern you want.