manualshive.com logo in svg

Federal Signal Corporation I-IP100ACX, Описание, характеристики и руководство по установке

Поделиться
Скачать
Federal Signal Corporation I-IP100ACX Скачать руководство пользователя страница 5

5

Safety Messages

Description, Specifications, and Installation Manual

Safety Messages

 

It is important to follow all instructions shipped with this product. This device is to be 

installed by trained personnel who are thoroughly familiar with the country electric 

codes and will follow these guidelines as well as local codes. 

Planning

•  If suitable warning equipment is not selected, the installation site for the Informer100 

Speaker is not selected properly or the Informer100 Speaker is not installed 

properly, it may not produce the intended optimum audible warning. Follow Federal 

Emergency Management Agency (FEMA) recommendations. 

•  If Informer100 Speakers are not activated in a timely manner when an emergency 

condition exists, they cannot provide the intended audible warning. It is imperative 

that knowledgeable people, who are provided with the necessary information, are 

available at all times to authorize activation. 

•  When Informer100 Speakers are used out of doors, people indoors may not be able to 

hear the warning signals. Separate warning devices or procedures may be needed to 

effectively warn people indoors. 

•  The sound output of Informer100 Speaker is capable of causing permanent hearing 

damage. To prevent excessive exposure, carefully plan placement, post warnings, and 

restrict access to areas near sirens. 

•  Activating the Informer100 Speaker may not result in people taking the desired 

actions if those to be warned are not properly trained about the meaning of warning 

sounds. Users should follow FEMA recommendations and instruct those to be 

warned of correct actions to be taken.

After installation, service, or maintenance, test the system to confirm that it is operating 

properly. Test the system regularly to confirm that it will be operational in an emergency. 

Safety Messages to Installers

People’s lives depend on your safe installation of our products. It is important to follow 

all instructions shipped with this product. This device is to be installed by a trained 

electrician who is thoroughly familiar with the National Electrical Code and/or Canadian 

Electrical Code and will follow the NEC and/or CEC Guidelines as well as all local 

codes. NEPA70, Chapter 5, “Special Occupancies,” must be followed. This Informer100 

Speaker should be considered a part of the warning system and not the entire warning 

system. 

Содержание I-IP100ACX

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды