12
Installation
Informer100 Speaker (Models I-IP100ACX and I-IP100DCX)
JP9
Reserved for factory testing
JP10
Reserved for factory testing
JP11
Short to restore factory default settings
Table 4 Environmental and Physical
Operating temp range -40°F to +104°F / -40°C to +40°C
Humidity range
0-95%, non-condensing
Size
7 in height, 9 in width, 10 in length
178 mm x 229 mm x 254 mm
Weight
I-IP100DCX
I-IP100ACX
16.2 lb/7.35 kg
19.2 lb/8.71 kg
Table 5 Hazardous Location Ratings
T-CODE AT 40°C
CLASS I, DIV 2, GRPS A,B,C,D T5
CLASS II, DIV 2, GRPS F,G
T6
CLASS III
T6
Installation
Read and adhere to all safety warnings in this manual before installing the
Informer100 Speaker.
Electrocution or severe personal injury can occur when making electrical
connections, drilling holes, or lifting equipment. Therefore, experienced
electricians in accordance with national and local electrical codes, acting
under the direction of the installation crew safety foreman, should perform
installation.
Determine a Suitable Location
The Informer100 can be mounted on any relatively flat surface with the supplied
mounting brackets. The mounting surface must be capable of supporting the weight of
the speaker. This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D;
Class II, Division 2, Groups F and G; Class III or nonhazardous locations only.
Wall Mounting
The Informer100 Speaker comes standard with a bracket for vertical wall or pole mount
with optional pole accessories. The standard mount can be flipped to allow ceiling mount.
To wall mount the Informer100 Speaker, do the following:
1. Find suitable location to mount speaker. Use industry or company preferred practices
when mounting hardware to structures.
