Federal Pump BGP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 16

14
MAINTENANCE
ASSEMBLY: All parts must be clean before
reassembly. Handle seal parts with extreme care.
DO NOT damage lapped surfaces. Reassemble in
reverse order of disassembly. Be careful of the
following:
1. During reassembly, periodically. rotate the
impeller by hand and check for smooth
rotation. If rotation is not smooth, check for
alignments in the bearing, and scratches on
the seal faces.
2. Upon completion of reassembly, rotate the
impeller by hand from the pump suction, and
check that it rotates smoothly without
touching the suction plate before operating
the pump.
O-rings, shaft seals, gaskets, and other pump
components are available as kits from the factory
and representatives.
••••••••••••••