MLED-CTRL Box
User manual
August 2020 - Version EN 1.1
www.fdstiming.com
Temperature can be displayed in either °C or °F.
During initial power up, the displays internal time is used. If GPS is selected as the default
synchro source in the settings, once a valid GPS signal is locked the information displayed is
synchronized accurately.
2.3.
Start-Finish Mode
Start-Finish mode is a simple yet accurate mode of displaying time taken between 2 positions
or inputs. This mode works either with the external Jack inputs 1 & 2 (wired solution), or
with WIRC (wireless photocells) signal.
Two input sequence modes are available:
a) Sequenced mode (Normal)
- On receiving an impulse on jack input 1 or wirelessly via WIRC 1, the running time
starts.
- On receiving an impulse on jack input 2 or wirelessly via WIRC 2, the time taken is
displayed.
b) No sequenced mode (Any Inputs)
- Starts and Finish actions are triggered by any Inputs or WIRC.
Besides Start/Finish impulse acquisition, jack inputs 1 & 2 have two other alternate functions
when using Radio inputs:
Alternate Function
Short pulse
Long pulse
1
Block/UnBlock
WIRC 1
or
2 Impulses
Reset sequence
2
Block/UnBlock
WIRC 1
and
2 Impulses
Reset sequence
- The Result is displayed for a predefined duration (or permanently) as per the user selected
parameter.
- Jack and Radio Inputs 1&2 lock time (delay time frame) can be changed.
- WIRC wireless photocells 1 & 2 can be paired to MLED-CTRL using the Menu buttons or via
our setup Apps.
- The running time / time taken can be any color pre-defined by the user.
