MLED-CTRL Box
User manual
August 2020 - Version EN 1.1
www.fdstiming.com
3.
Menu & Settings
Display and Mode parameters can be defined via 2 different methods.
a) Navigating the display integrated menu using the onboard display push buttons
b) Using our iOS application
c) Using our PC application
3.1.
Display Menu hierarchy
To enter the display menu, press the illuminated orange button for 3 seconds.
Once in the menu use the illuminated Green button to navigate through the menu and the
illuminated Orange button to make a selection.
Depending on the mode selected or activated options status some menu items may be not visible.
Main menu:
-
MODE SETTINGS
(Define the parameters of the selected mode)
-
MODE SELECTION
(Select a mode. Some modes need to be activated first with a code from your supplier)
-
GENERAL SETTINGS
(Display general settings)
-
EXT INPUTS
(Parameters of the 2 external inputs – Jack connectors)
-
RADIO
(Radio settings and WIRC wireless photocell pairing)
-
EXIT
(Leave the menu)
General Settings:
-
DISP INTENSITY
(Change the default display intensity)
-
BIG FONTS
(change the full height fonts)
-
GPS STATUS
(Display the GPS status)
-
LICENSE CODE
(Enter a license code to activate additional modes)
-
EXIT
(Leave the menu)
Mode Selection:
-
USER CONTROL
(Standard display mode to be used with iOS App or RS232 connection)
-
TIME/TEMP/DATE
(Display the time of date, time or temperature or all three scrolling)
-
START/FINISH
(Start / Finish - With running time)
-
SPEED
(Speed trap)
-
COUNTER
(Input 1 increments Counter, Input 2 decrements Counter, reset with Input2 long press)
-
COUNTDOWN
(Count Down Start/Stop with Input 1 impulse, reset with Input2)
-
EXIT
(Leave the menu)
Mode Settings (Display Mode)
-
LINES ADDRESS
(Set the line number for each zone)
-
LINES COLOR
(Set the color of each zone)
-
BAUDRATE
(Select the RS232/RS485 baud rate)
-
PROTOCOL
(Select the RS232 output protocol)
-
EXIT
(Leave the menu)
