FCI Watermakers MAX-Q+, Руководство пользователя и инструкция по установке

Страница: 95 / 170

FCI WATERMAKERS, INC. 95 Operational Instructions
The V4 Control System Alarms are divided into four categories:
Notification
– This is used to alert the user of a situation
happening that does not affect the safety of the machine.
Warning – This is used to alert the user that an item needs to be addressed in the
near future. An example would be the High Pressure Pump Oil change is due soon.
Alarm – This is used to alert the user that an item needs to be addressed immediately
otherwise the system will shutdown. An example would be if the Product TDS is higher
than the setpoint. If left alone, the system will safety shut itself down to avoid damage.
Shutdown – This is used to protect both the user and machine. If a condition
arises that is considered unsafe, the unit will immediately shutdown. An
example would be the High Pressure Shutdown. If the system reaches
its high pressure limit the unit will immediately shutdown.
NOTIFICATIONS
The following is a list of notifications and their causes.
1. High Pressure APC Notification (If equipped with APC):
Cause : Notification is triggered when the unit is running and the high
pressure reaches 950 PSI. The APC system stops running and holds the
High Pressure Control Valve at its current setpoint to prevent High Pressure
Shutdown. System can be run but production output may be reduced. System
will resume APC when pressure is reduced due to water conditions.
Clear
: Watermaker is being run in a very high salinity environment or cold water.
WARNINGS
The following is a list of warnings and their causes,
and how to clear the warning condition.
1. FWF Filter Change Warning:
Cause : Warning is triggered when the Life Monitor indicates
the Fresh Water Filter needs to be changed.
Clear : Once you have changed the Fresh Water Flush Filter, navigate to the
Setup / Stats. A reset button under the life monitor for the fresh water flush
will appear. Hold the button for 5 seconds or until the button disappears.
2. Oil Change Warning:
Cause
: Warning is triggered when the Life Monitor
indicates the HPP Oil needs to be changed.
Clear
: Once you have changed the HPP Oil, navigate to the Setup /
Stats. A reset button will appear under the life monitor for the HPP Oil.
Hold the button for 5 seconds or until the button disappears.
SYSTEM ALARMS