FCI Watermakers MAX-Q+, Руководство пользователя и инструкция по установке

Страница: 78 / 170

FCI WATERMAKERS, INC. 78 Operational Instructions
CONFIG SCREEN #1
The Config Screen allows the user to select different run options for their unit.
Max Run Time
– This allows the user to setup the maximum amount of time the unit
will run. Once this option is turned on, you will be able to set the number of hours you
want the system to run for prior to shutting down and fresh‑water flushing itself.
Max Product
– This allows the user to setup the maximum number of gallons the system
will produce. Once the option is turned on, you will be able to set the number of gallons
you want the system to produce prior to shutting down and fresh‑water flushing itself.
Tank Floats – This allows the user to install tank floats on their product water tank
and wire the floats to the controller (see instruction in wiring schematic). Once the
option is turned on, the controller will wait till both floats are dry and turn on the
unit. Once both floats are wet the unit will shutdown and fresh‑water flush itself.
Time of Day
– This allows the user to set times to start and stop the system. Once
pressed, a start hour and minute will appear, and a stop hour and minute will
appear. Set your time (24 hour based) and the system will automatically start and
stop. Once stopped, the system will shutdown and fresh‑water flush itself.
Clear – Press this button to clear the system once a shutdown has taken place.
Stop – Press this button to stop the system.
Navigation Bar – This allows the user to easily navigate between main screens.
Left Arrow – Goes back to the main setup screen.
Down Arrow – Goes to page #2 of Config.
DISPLAY SCREENS
(continued)