FCI Watermakers MAX-Q+, Руководство пользователя и инструкция по установке

Страница: 76 / 170

FCI WATERMAKERS, INC. 76 Operational Instructions
SERVICE SCREEN #1
The Service Screen allows the user to test and run the system in a manual mode.
To turn on a setting, touch the grey circle. The circle will then turn
to a green circle, indicating the item is on. To turn off an item, touch
the grey square. The square will turn red once the item is off.
Service Mode
– Allows the user to turn service mode on/off. When service
mode is on, the user can manually activate the pumps and valves. Once
complete, turn off service mode in order to run the machine normally.
Service mode can only be activated when the machine is not running.
LP Pump – Manually turn on the low pressure pump.
HP Pump – Manually turn on the high pressure pump.
Quality – Manually open or close the quality valve.
Flush – Manually open or close the fresh water flush valve.
Clear – Press this button to clear the system once a shutdown has taken place.
Stop
– Press this button to stop the system.
Navigation Bar
– This allows the user to easily navigate between main screens.
Left Arrow
– Goes back to the main setup screen.
Down Arrow
– Goes to page #2 of Service.
DISPLAY SCREENS
(continued)