System Manual | 2013
VAIE 2000 | Voice Alarm Integrated Systems
10
VAC 2006 • VAR 2006
UK
8.5.3
FAuLtS
Viewing of Failures (from the oPERAtoR menu)
The OPERATOR menu provides access to the “FAULTS” panel, as illustrated
in the “FAULTS” section of the <INSPECTION> menu. The additional function
enabled on accessing the “Report> FAULTS” panel from the OPERATOR level
is “Manual Resetting of a Failure Signal”.
8.5.3.1 Manual Resetting of a Failure Signal (RES)
Manual Resetting is necessary in the following cases:
• To cancelled a stored
RES
(RESUMED) signal following detection and
subsequent clearing of a failure, for all the other items being monitored.
• To reset the buzzer.
8.5.5
Exit > Logout
Exiting from a System Level
Upon completing the various activities, before returning to the Basic Level of
the Music Menu, it is advisable to log out of the System Level of the current
menu, in order to reinstate the password required for accessing the system
again in future, thus preventing unauthorised personnel from accessing the
advanced functions of the system.
From the options list of the OPERATOR MENU:
• turn the +/- knob to select the following option:
Exit> Logout
• press the Ok key
The system will return to the Basic Level, showing the MUSIC Menu panel.
The prompt requiring the access password to be entered will also be rein-
stated for any other levels that had been reached.
8.5.4
FIRMWARE VERSIon
For viewing the Firmware version
Panel for viewing the version of the firmware installed in the system. The
firmware of the following three sections is indicated:
>
units software
Main software installed on the CPU for managing the units.
>
Zones software
Main software installed on the CPU for managing the zones.
>
Matrix firmware
Firmware for managing the audio signals.
To RESET the FAULT signalling manually, from the general FAULT display panel
•
Press the RESEt key
Upon completion of the procedure, press the ESC key repeatedly to return to the OPERATOR menu.
