Fbt VAIE 2000 Скачать руководство пользователя страница 19

System Manual | 2013

VAIE 2000 | Voice Alarm Integrated Systems

VAC 2006 • VAR 2006

UK

C3.

 

ALERt button

 

key for sending pre-recorded Alert messages manually, operation during Manual Emergencies. In the idle condition this key is not 

operational.

C4.

 

EVAC button

 

key for sending pre-recorded Evacuation messages manually, operational during Manual Emergencies. In the idle condition this key is 

not operational.

C5.

 

MEnu key

 

Multi-purpose key for accessing the Main Page, for navigating among the menus and for specific functions of the submenus indicated on 

the displays.

C6.

 

oK key

 

Multi-purpose key for confirming selections, for navigating among the menus and for specific functions of the submenus indicated on the 

displays.

C7.

 

ESC key

 

Multi-purpose key for returning to the Music menu, for navigating among the menus and for specific functions of the submenus indicated 

on the displays.

C8.

 

numerical keys from 1 to 6

 

Multipurpose keys, operational throughout the system. These keys are used to select the zones, from 1 to 6. For the VAC 2006 unit being 

used. They enable the access password to be entered or the specific functions indicated on the status bar on the display to be applied.

C9.  Status signalling

 

• 

ALARM LEd (red)

 

LED for signalling the existence of a “Voice Alarm Condition”. A VOICE ALARM condition can be activated both automatically from an 

external peripheral unit, and manually by the operator of the VAC 2006 or of an emergency microphone station. During the VOICE ALARM 

condition, the standard functions for playing out music and the voice source service are disabled. In the “quiescent condition” the ALARM 

LED is extinguished.

 

•  

FAuLt LEd (yellow)

 

LED for signalling the existence of a “Fault condition”. This indicates that the diagnostic system has detected at least one failure in the 

VAC 2006 unit or in one of the items of equipment connected to it and covered by the diagnostic procedure. When the fault condition is 

cleared, the FAULT LED extinguishes automatically and the wording “RES” is shown on the FAULTS display, to show that a failure has 

been detected and subsequently remedied (RESUMED). The LED signalling that the fault has been cleared will extinguish once the 

MANUAL FAULT RESET procedure has been completed. The FAULT signalling can be active during the standard functions of music and 

voice reproduction (quiescent Condition) and Emergency (Alarm Condition).

 

•  

dIS. LEd (yellow)

 

LED for signalling activation of the disablement of the emergency zones (DISABLING). The DISABLING signal indicates that at least one 

zone has been disabled by the emergency envisaged when configuring the system. Activation of the DISABLING signal does not prevent 

normal operation of the system in a “quiescent Condition”.

 

•  

SYS LEd (yellow)

 

LED for signalling an existing “System Fault” (System CPU Fault) condition. When the SYS LED is illuminated, all the operational functions, 

whether of the standard or emergency type, are disabled. 

 

•  

BAtt. LEd (green)

 

This LED refers to the 24 VDC auxiliary power supply. The BATT. LED lights up to indicate that the 24 VDC power supply is connected 

to the system.

 

•  

on LEd (green)

 

This LED signals that the VAC 2006 system is switched on and operational.

 

The ON LED continues to be illuminated when:

 

-  230 VAC power supply present and POWER switch in the ON position.

 

The ON LED will flash continuously when:

 

-  there is no 230 VAC power supply but the 24 VDC power supply is available.

 

The ON LED will be Off in the following cases:

 

-  no 230 VAC and no 24VDC power supply, or

 

-  230 VAC power supply in order, no 24 VDC power supply and POWER switch in the OFF position. 

C10.

 

+/- knob

 

This is a rotary control with no end-of-travel. It is a multi-purpose control that depends on the specific menu that is operational. It is used 

to move the cursor to select and adjust values. In an idle condition, in the Music menu it is used to control directly the master output 

volume of the BGM.

C11.

 

“EXt.” uSB socket

 

Powered type A USB socket for connecting external flash memory devices (for future use).

C12.

 

“to PC” uSB socket

 

Type B USB socket, provisions for connecting the management PC in order to use the system software.

Содержание VAIE 2000



























































Отзывы: