- 9 -
Arming the System
IS THE SYSTEM READY?
You can arm and disarm the burglar portion of your security system. Before
you can arm the system, it must be “ready.” If you have a protected door open,
or someone is moving in view of a motion detector, the system will not display
the “READY” message.
The system is ready if the READY light is lit and the display shows:
LCD Keypad:
SYSTEM READY
PART 1
Fixed-Word Keypad:
READY LED lit
LED Keypad:
READY LED lit
NOTE:
If programmed by your installer, you may arm the system if a delay or
interior zone is faulted. However, faulted zones must be restored before your
exit time expires or an alarm or zone bypass will result. Ask your installer if
your system has this feature and, if so, if it causes an alarm or zone bypass.
TO ARM THE SYSTEM AND LEAVE
Enter your user code.
The System ARMED light will go on and the display will show:
LCD Keypad:
ON:
AWAY 120s
PART 1
Fixed-Word Keypad:
ARM LED lit
120
LED Keypad:
ARM LED lit
NOTE:
The number 120 shown above for the LCD and Fixed-Word keypads
indicates a counter that is updated every second and displays the amount of
time remaining to exit without sounding an alarm.
Exit through a door designated by your installer as an exit/entry door. You
must leave within the exit time programmed by your installer. Refer to the
reference sheet for the time that has been set for your system.
This system can be programmed by the installer for the AUTOSTAY feature,
which automatically bypasses interior zones programmed for AUTOSTAY if
you arm the system and do not exit through a delay zone during exit time.
