- 21 -
Using a Pager
If programmed, the system can send messages to a pager. The messages are
displayed as follows:
ACCT E XXX
where:
"ACCT"
= the 4-digit central station no. 1 account number set by your
system installer. We suggest that you obtain the number from
your system installer and record it here.
"ACCT"
=
"E"
= the event code. There are 4 event types: alarms, troubles,
openings, and closings. These event codes are as follows:
Openings = 0, Closings = 1, Alarm or Trouble = 9
"XXX"
= the zone or user designation, depending on the event
If multiple events occur, the signal for the highest-priority event is sent first. Events
ranked from highest to lowest priority are alarm, trouble, open, and close.
CHANGING THE PAGER PHONE NUMBER (FOLLOW-ME)
You can change your pager follow-me phone number as follows if your installer
enabled this feature:
1. Access pager number programming by pressing the following keys in
sequence:
[#], [5], and [8].
An acknowledgement tone sounds to indicate pager number programming
has been accessed.
The #
,
5
,
8
command is accessible only while the system is disarmed and
the dialer, dialer delay, and bell are not active.
In pager phone number programming mode, only the LCD keypad provides visual
display of the numbers already programmed or numbers that are being changed.
The LED and fixed-word style keypads provide no visual keypad display of these
numbers.
