- 15 -
Miscellaneous Commands
TO DELETE A USER CODE
To delete a user, press the Code button followed by the 4-digit (or 6-digit)
master user code. Enter the user number, then press [#] to delete. For
example, to delete user 3, do the following:
Master User Code
User ID
# to delete
CODE 03
[#]
NOTE:
User no. 1, the master user, cannot be deleted but it can be changed
using the ADD OR CHANGE A USER CODE procedure.
SEND HELP ALERTS
Your system can be programmed for 3 separate keypad Send Help alerts that
would send an emergency signal to your central station. See the System
Reference sheet (page 7) to see which have been programmed for your system.
DURESS
Your system can be programmed to send an emergency signal to the central
station if you are forced to enter the premises under threat. If you choose to
include this feature, assign codes to users 31 and 32 (OMNI-626 and OMNI-
624EU) or 60-64 (OMNI-848 and OMNI-848EU), which are dedicated to this
function, if programmed. Use these codes only under a duress circumstance.
QUICK ARMING
If programmed by your installer, Quick Arming allows you to arm the system
in the AWAY mode without entering a user code.
Press
#
, then
1
.
NOTES:
1)
Disarming your system always requires a valid user code.
2)
This system can be programmed by the installer for the AUTOSTAY
feature which automatically bypasses interior zones if you arm the system
and do not exit through a delay zone during exit time.
