- 16 -
Miscellaneous Commands
(cont)
QUICK FORCED ARMING
If programmed by your installer, Quick Forced Arming allows you to arm the
system in the AWAY mode by automatically bypassing all zones that are not
ready.
Press
#
, then
2
.
NOTES:
1)
A valid user code is still required to disarm the system.
2)
This system can be programmed by the installer for the AUTOSTAY
feature which automatically bypasses interior zones programmed for
AUTOSTAY if you arm the system and do not exit through a delay zone
during exit time.
UL NOTE:
This feature is disabled on UL installations.
QUICK BYPASS
If you have Quick Bypass programmed for your system, you can bypass zones
without entering your user code. The Quick Bypass procedure is:
BYPASS
2-digit Zone No. (e.g., 01 for zone 1)
NOTE:
Bypassed zones are not protected when the system is armed. After the
bypass command has been accepted, the keypad sounds one long beep. The
zone light of the bypassed zone(s) slowly blinks, or the display shows:
LCD Keypad:
BYPASSED: ZN1
PART 1
Fixed-Word Keypad:
BYPASS LED lit
LED Keypad:
Zone light of the
bypassed zone(s) will
slowly blink
NOTE:
Temporary users (e.g., babysitters, housekeepers, etc.) should not be
shown the Bypass procedure.
QUICK EXIT
Quick Exit restarts the exit delay time if the system is already armed. This
allows someone to leave after the system has been armed, without having to
disarm the system first. To restart the exit delay time, press:
STAY
.
QUICK HELP
Quick Help allows the user to view all of the quick commands available in the
system. To access Quick Help, press:
#
, +
5
, +
0
.
