- 8 -
System Reference (Cont’d)
SEND HELP ALERT
All keypads are equipped with emergency-pair keys. In order to
activate the alert, both keys must be pressed at the same time. The
type of keypad you have installed dictates which keys you press. Your
installer will show you how to activate these emergency keys. The emergency
keys used for all keypads are shown below.
The following SEND-HELP ALERT is programmed into my system:
KEYS DESCRIPTION
[#] & [
✱
]
_______________________________________
[7] & [9]
_______________________________________
[1] & [3]
_______________________________________
PAGER ALERT
If programmed, the emergency may also be used to send an alert message to
a pager. Ask your installer if this was done.
USER CODE ASSIGNMENTS
In the following table, enter the names of the individuals assigned to each
user number.
User Assigned
To… User Assigned
To…
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
____ ____
USER CODE NOTE: User codes can be either 4 digits or 6 digits, depending
4-digit
6-digit
on installer programming. Ask your installer what type of user codes (4- or 6-
digit) are being used in your system. When performing system functions, you
must use the appropriate 4 or 6-digit user codes.
