- 16 -
Miscellaneous Commands
TO SEND HELP ALERTS
Your system can be programmed for 3 separate keypad Send Help alerts that
would send an emergency signal to your central station or trouble signal to a
pager. See the System Reference sheet to see which have been programmed
for your system.
DURESS
Your system can be programmed to send an emergency signal to the central
station if you are forced to enter the premises under threat. If you choose to
include this feature, assign a code to user 15, which is dedicated to this
function, if programmed. Use this code only under a duress circumstance.
QUICK ARMING
If programmed by your installer, Quick Arming allows you to arm the system
in the AWAY mode without entering a user code.
Press
#
then
1
.
NOTE: Disarming your system always requires a valid user code.
NOTE: This system can be programmed by the installer for the AUTOSTAY
feature, which automatically bypasses interior zones if you arm the system
and do not exit through a delay zone during exit time.
QUICK FORCED ARMING
If programmed by your installer, Quick Forced Arming allows you to arm the
system in the AWAY mode by automatically bypassing all zones that are not
ready.
Press
#
then
2
.
NOTE:
A valid user code is still required to disarm the system.
UL NOTE:
This feature is disabled on UL installations.
NOTE:
This system can be programmed by the installer for the AUTOSTAY
feature, which automatically bypasses interior zones if you arm the system
and do not exit through a delay zone during exit time.
QUICK BYPASS
If you have Quick Bypass programmed for your system, you can bypass zones
without entering your user code. The Quick Bypass procedure is:
BYPASS
plus 2-digit Zone No. (e.g., 01 for zone 1)
