- 5 -
Quick Reference (Cont’d)
The following table lists the “Quick Commands” available with this control.
Key Description
Keypads
Comments
#
1
Quick Arm – if system is ready
All keypads Allows you to arm the system without
requiring your user code. User code is
always needed to disarm the system.
#
2
Force Arm – bypasses faulted
zones
All keypads Allows you to arm the system even if
some zones are faulted. These zones will
be automatically bypassed and will be
unprotected.
BYPASS
nn (zone no.)
Quick Bypass
All keypads If not enabled, requires user code with
authority 1, 2, or 3.
#
3
Set Time and Date
All keypads May require user code.
#
4
Zone Directory
LCD* only Lists each zone with its descriptors. Mode
terminates after last enabled zone.
#
50
Quick Help
LCD* only
Provides a listing of all quick commands
available in the system.
#
51
Show Time and Date
LCD* only May also require code.
#
52
Show Auto Arm Time
LCD* only May also require code.
#
53
User Event Log View
LCD* only Also needs user code with authority level
1 or 2.
#
54
Set Auto Arm Time
All keypads May also require code.
#
55
Display Firmware Version
LCD* only Displays panel’s revision.
#
57
Door Strike
All keypads Activate doorstrike or trigger. May
require certain user code.
#
58
Change/View Pager Number
All keypads For keypad, only LCD* shows phone
number. May also require code.
#
6
Display/Toggle Chime Mode
All keypads LCD* displays current state first, then
offers to toggle. All others just toggle the
state.
#
8
User Page Toggle
All keypads Toggles if users should send page for
Open/Close.
#
9
User On-line
All keypads Connects to downloader while on line,
disconnects home phone.
* 2-line alpha display
