- 18 -
Miscellaneous Commands (Cont’d)
TO VIEW AUTO-ARM TIME (LCD Keypads Only)
To view the auto-arm time, press:
#
then [5] [2] then user code* with
authority level 1 or 2.
AUTOARM TIME:
05:00PM
*The user code is not required if so programmed by installer.
DOOR STRIKE
To activate door strikes, press:
#
then [5] [7], then Door No.
If programmed, certain user codes (10–14) can also be used to open a door.
See your installer for door numbers.
TO VIEW TIME (LCD Keypads Only)
To view the system time, press:
#
then [5] [1]. A typical display is as
follows:
Jan 27, 2001
08:15A
TO SET TIME
To set the time, press:
#
[3] then user code (not required if so
programmed by installer), then follow the prompts (on LCD keypads only)
and enter the hour, minute, month, day, and year. All entries are 2-digit
entries. Additionally, if your system installer has set your system to use an
internal crystal real-time clock, you will be promted to enter a crystal
adjustment. If your clock has been keeping the proper time, respond to the
crystal adjustment prompt by pressing [1] followed by [0][0] when the system
prompts you for an adjustment value. If the clock has not been keeping time
correctly, when the crystal adjustment prompt is displayed, proceed as
follows:
1. Enter 0 (Adjust up - Clock slow) or 1 (Adjust down - Clock fast). The
adjustment value prompt is displayed.
2. Determine how far off the clock is (in seconds) from the correct time.
3. Determine the number of days since the last time the clock was set.
4. Divide the number of seconds that the clock is off by the number of days
since the last time the clock was set.
