- 17 -
Miscellaneous Commands (Cont’d)
NOTE: Bypassed zones are not protected when the system is armed. After
the bypass command has been accepted, the keypad sounds one long beep.
The zone light of the bypassed zone(s) slowly blinks, or the display shows:
LCD Keypad:
BYPASSED: ZN1
Fixed-Word Keypad:
Bypass LED lit
LED Keypad:
Zone light of the
bypassed zone(s) will
slowly blink
NOTE:
Temporary users (i.e., babysitters, housekeepers, etc.) should not be
shown the Bypass procedure.
QUICK EXIT
Quick Exit restarts exit delay time if the system is already armed. This
allows someone to leave after the system has been armed, without having to
disarm the system first. To restart the exit delay time, press:
STAY
TO TURN CHIME ON/OFF
Chime is an optional feature that causes the keypad to beep when selected
doors are opened while the burglary protection is disarmed.
Only your installer can program a zone for the Chime feature, but once
programmed, you can turn Chime on or off to meet your daily needs.
To turn Chime on or off, press:
#
then
[6]
TO VIEW QUICK COMMAND LIST (LCD Keypads Only)
To view a display of available quick commands, press:
#
then [5] [0].
To step through the available quick commands, press # .
To exit the quick command list, press
✳
.
TO SET AUTO-ARM TIME
Auto-Arm Time lets you set the time your system automatically arms.
To set the Auto Arm Time, press:
#
[5] [4] [user code*] [hour 00–23] [minute 00–59]
*The user code is not required if so programmed by installer.
The keypad will prompt you for the required entries.
