manualshive.com logo in svg

Fayat Bomag BW 900-50, Руководство по обслуживанию

Поделиться
Скачать
Fayat Bomag BW 900-50 Скачать руководство пользователя страница 136

6.

Reconnect the high pressure hoses to the drum drive motors.

1.

WARNING!
Danger of accident!

The drums must be able to rotate freely.

Jack or lift up the machine.

2.

Keep circulating the complete tank content

with the filling and filtering unit throughout the

entire flushing process.

3.

NOTICE!

Move the travel lever only to travel direction

forward, as otherwise the flushing filter will be

subjected to oil flow from the wrong direction.

Start the engine, run it with maximum speed and shift the

travel lever to travel direction forward.

4.

Run the flushing procedure for approx. 10 minutes. During

this process keep changing the pump flow by shifting the

travel lever several times between full and half speed in

reverse travel.

5.

Shut down the engine.

6.

Remove the flushing filter and reconnect the high pressure

hoses.

Flushing the drum drive motor

Fig.  141

Fig.  142

Fig.  143

Hydraulic system – Flushing and bleeding

 

BW 900-50

 

139

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание Bomag BW 900-50






















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды