manualshive.com logo in svg

Fayat Bomag BW 900-50, Руководство по обслуживанию

Поделиться
Скачать
Fayat Bomag BW 900-50 Скачать руководство пользователя страница 121

5.

Read charge and high pressure gauges.

ð

Nominal value
Charge pressure gauge: See technical

data.

High pressure gauge: Both identical pres-

sure (charge pressure).

Evaluation of test
If the nominal value is not reached, check

the steering/charge pump.

6.

Move the travel lever quickly forward and backward, read the

pressure gauges.

ð

Nominal value
See technical data.

Evaluation of test
If the charge pressure drops below the

nominal value during the high pressure

test, check the individual components.

If the specified high pressure is not

reached, check the travel pump.

If the starting pressure is reached to one

travel direction only, check the high pres-

sure relief valves.

5.5.3  Adjusting the neutral positions of the travel pump

Special tools
Hydraulic test case

NOTICE!

Perform measurements at operating temperature

of the hydraulic oil (40 °C).

Hydraulic system – Tests and adjustments

 

BW 900-50

 

124

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание Bomag BW 900-50






















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды