manualshive.com logo in svg

Fayat BOMAG BW 124 PDH-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat BOMAG BW 124 PDH-5 Скачать руководство пользователя страница 33

3.4.3 

Safety regulations and environmental protection regula-
tions for handling oil

WARNING!
Danger of burning by ignited oil!

– Do not allow oil to come into con-

tact with hot components.

– Smoking and open fire is pro-

hibited!

– Wear your personal protective

equipment (protective gloves,

protective clothing).

CAUTION!
Health hazard caused by contact

with oil!

– Wear your personal protective

equipment (protective gloves,

protective clothing).

– Do not inhale any oil vapours.
– Avoid contact.

CAUTION!
Danger of slipping on spilled oil!

– Immediately bind spilled oil with

an oil-binding agent.

ENVIRONMENT!
Oil is an environmentally haz-

ardous substance!

– Always keep oil in proper con-

tainers.

» Continued on the next page

Fig.  5

Concerning your safety – Handling fuels and lubricants

 

BW 124 PDH-5

 

33

Содержание BOMAG BW 124 PDH-5



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды